| |
Ceramic Fibre Paper |
 |
Availablity
Standard sizes: 500 mm width X 1000 mm length
1000 mm width X 1000 mm length
|
Features
• High flexibility
• Good resistance to tearing
• Precise thickness
• Resistance to thermal shock
• Very low thermal conductivity |
| Description |
Ceramic firber Papers are manufactured from high
purity refractory fibres and designed for high
temperature insulation. Advanced production
techniques ensure uniform fibre distribution and
close control of thickness and density.
Papers are being produced from Alumina silicate
fibres with minimum addition of carefully selected
Bonds, which burn out cleanly in service. |
|
|
|
Type : Bulk Refractory fibre |
|
| |
| Classification temperature |
STD Paper : 1260 ° C
AZS Paper : 1400 ° C |
| |
| Applications |
• Insulating gaskets
|
• Expansion joints |
| • Die cut gaskets for domestic appliances |
• Gaskets , seals & parting media |
| • Ladle lining back up |
• Mould liners |
| • Parting media |
• Heat loss reduction in sub entry nozzle |
| • Thermal barrier for vehicles (Silencers, catalytic exhaust and heat shields) |
|
| |
| Main Properties |
| Physical Properties |
STD Paper |
STD Paper |
| Classification temperature0C |
1260 0C |
1400 0C |
| Chemical composition (%) |
|
|
| Al2O3 |
> 42 |
> 32 |
| SiO2 |
< 56 |
< 52 |
| ZrO2 |
- |
< 19.5 |
| Loss on ignition % |
< 10 |
< 10 |
| Density (Nominal) kg/m3 |
150 |
150 |
| Tensile strength (Kgf/m2) |
9000 |
9000 |
| Linear shrinkage % - 24 hrs (Max) |
2.0 (At 11000C) |
2.0 (At 12000C) |
| Availability & Packaging - 1000 mm width x 1000 mm length
Thickness (mm) |
| 2 |
X |
X |
| 3 |
X |
X |
| 4 |
X |
X |
| 5 |
X |
X |
| 6 |
X |
X |
| 8 |
X |
X |
| 10 |
X |
X |
| 12 |
X |
X |
|
| |
All above products are subjected to standard tolerances. The values given herein are typical values obtained in
accordance with accepted test methods and subject to normal manufacturing variations. They are supplied as a
technical service and are subject to change without notice. Therefore, the data contained herein should not be
used for specification purposes. |
